13
Turning the TV on for the First Time
Turning the TV on for the First Time
1. Connect the mains cable to the mains socket after you have completed all the
connections.
2. The first time you turn the TV on, it will go straight to the Installation Guide.
3.
Press the [
/ / < / >
] to navigate the menu and change the settings. Press the [
OK
]
button to confirm.
Language
Select your desired language to be displayed on the menu.
Location
Select the location where you will operate the TV.
Time Zone
Select the local time zone according to your region. (Only
available in certain countries)
End User
License
Agreement
Accept EULA.
Help promote the TV user experience.
Network
Connection
If your TV does not detect an Ethernet connection, then it will
select Wireless automatically, select your network from the list
that displays or you can also add a hidden network. When you’re
done, move to the next screen.
Success
Congratulations, you have finished the Wizard setup.
Press "Finish" to use your TV, for retailers press "Store Mode".
To Next Page
Loading...
Need help?
General
