12
Display Controls
Your product has two control panels, one is on the fridge door and the other is on My
Fresh Choice door. Use your appliance according to the following control guidelines.
Using the control panel on the fridge door
The control panel on the fridge door shows in the diagram below.
When the appliance is powered on for the
first time, the backlighting of the icons on
the display panel starts working. If no
buttons have been touched and the doors
are closed, the backlighting will turn off
after 60 seconds.
The control panel consists of two areas
about temperature, and one area about
different modes.
Caution!
When you set a temperature, you set an
average temperature for the whole
refrigerator cabinet. Temperatures inside
each compartment may vary from the
temperatures displayed on the panel,
depending on how much food you store
and where you place it. High or low room
temperature may also affect the actual
temperature inside the appliance.
“
““
“
Child Lock and Door Alarm
”
””
”
This button serves two purposes:
1. Child Lock
Press and hold
“
Alarm
”
for 3 seconds to
lock the all the Control Panel including
dispenser function. If Control panel is
locked, the icon
“ ”
will be on, and none of
the buttons on the Control panel work.
To unlock the Control panel, please press
and hold
“
Alarm
”
for 3 seconds again.
2. Door Alarm
In case of alarm,
“
”
icon will be on and
a buzzing sound will be heard. Touch
“
Alarm
”
key to clear alarm then the
“
”
icon will turn off and the buzzing will stop.
When the door of fridge, variation or
freezer is open over 2 minutes, the door
alarm will come on. In case of alarm,
“
”
icon will be on and will be buzzing sound.
The buzzer will sound 3 times per minute
and will stop after 10 minutes. Also it can
be stopped by closing the door.
When Child Lock is off, and the doors are
open, you can turn alarm off by touching
“
Alarm
”
.
To save energy, please avoid keeping
doors open for a long time when using
refrigerator.
To Next Page
Loading...
Need help?
General
