13
Tip:
• While in OPTICAL or HDMI ARC mode, if there’s no sound output from the
unit, you may need to activate PCM Signal output on your source device (eg.
TV, DVD or Blu-ray player).
Connect Power
Risk of product damage!
- Ensure that the power supply voltage corresponds to the voltage printed
on the back or the underside of the unit and the power adapter.
- Before connecting the AC power cord, ensure you have completed all
other connections.
- Connect the DC cable of the power adapter to the DC Socket of main unit.
- Connect the mains cable to the AC~ Socket of power adapter and then
into a mains socket.
* Power cord quantity and plug type vary by regions.
Basic Operation
Standby/ON
When you rst connect the main unit to the mains socket, the main unit will
be in Standby mode.
• Press the button on the unit or on the remote control to switch the unit
ON.
• Press the button again to switch the unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the
unit OFF completely.
Auto Wake
• If a TV or an external device is connected (OPTICAL / HDMI ARC), the unit
will switch on automatically when the TV or the external device is switched
on and output audio signals .
How to Enable Auto Wake
• Short press the (SOURCE) button and VOL + button on the unit to
enable or disable Auto Wake function.
• Auto Wake On: white and green LED blink twice sequentially. While in
STANDBY mode, the RED LED is breathing.
• Auto Wake Off: white and red LED blink twice sequentially. While in
STANDBY mode, the LED is in solid red.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
