Hisense J1-91 User Manual

The remote controller transmits signals to the system.
Remote controller
1
1
2
3
12
4
5
11
6
7
8
9
10
SWING BUTTON
FAN BUTTON
ROOM TEMPERATURE
SETTING BUTTONS
SLEEP BUTTON
IFEEL BUTTON
CLOCK BUTTON
ON/OFF BUTTON
SMART BUTTON
MODE BUTTON
TIMER ON/OFF BUTTON
13
SUPER BUTTON
Used to start or stop the fast cooling/heating.
(Fast cooling operates at high fan speed with
16℃ set temp automatically ; Fast heating
operates at auto fan speed with 30℃ set temp
automatically)
Used to stop or start vertical adjustment
louver swinging and set the desired up/down
airflow direction.
Used to select fan speed in sequence
auto, high, medium or low.
Used to set or cancel Sleep Mode operation.
Used to set IFEEL mode operation. Press it
once, the IFEEL function will be started. Press
it again, the IFEEL function will be shut off.
If the IFEEL function can't be shut off, please
try to press this button about 5 seconds.
Advice to put the remote controller in the place
where the indoor unit receive signal easily.
Advice to cancel the IFEEL mode so as to save
energy when stopping the air conditioner.
Used to set the current time.
Used to enter fuzzy logic operation directly,
regardless of the unit is on or off.
The appliance will be started when it is
energized or will be stopped when it is
in operation, if you press this button.
Press this button to select the operation mode.
Used to set or cancel the timer operation.
Remote controller
Indication symbols on LCD:
Note: Each mode and relevant function will be further specified in following pages.
Signal transmit
Dry indicator
Fan only indicator
Heating indicator
Cooling indicator
High fan speed
Medium fan speed
Low fan speed
Display temperature
Display set timer
Display current time
Auto fan speed Smart indicator
Sleep indicator
Ifeel
Super indicator
ON
OFF
14
Used to adjust the room temperature and
the timer, also real time.
10
11
12
13
14
3
4
ON/OFF
MODE FAN
SWING
SLEEP
SUPER
SMART
IFEEL DIMMER
TIMER ON TIMER OFF CLOCK
ON
OFF
ON
OFF
1
2
6
7
5
8
9
DIMMER BUTTON
When you press this button, all the display of
indoor unit will be closed. Press any button to
resume display.

Hisense J1-91 Specifications

General

Brand	Hisense
Model	J1-91
Category	Remote Control
Language	English