7
Operation instructions
SLEEP mode
SUPER mode
SLEEP mode can be set in COOLING ,HEATING mode. or DRYING
This function gives you a more comfortable environment for sleep.
The appliance will stop operation automatically after operating for 8 hours.
In SLEEP mode,
Fan speed is automatically set at low speed.
Set temperature will rise by 2 if the appliance operates in cooling ℃ at most
mode for 2 hours constantly, then keeps steady.
Set temperature will decrease by 2℃ at most if the appliance operates in
heating mode for 2 hours constantly, then keeps steady.
Note: In cooling mode, if room temperature is 26℃or above, set temperature will not
change.
Note: Heating is NOT available for cooling only air conditioner.
Note: SMART button is not available in SUPER mode.
For the first generation of products, you can’t set temperature in super mode,
but you can press TEMPERATURE SETTING button to escape super mode.
SLEEP mode
SUPER mode
ON/OFF
MODE FAN
SWING
SLEEP
SUPER
SMART
IFEEL DIMME R
TIMER O N TIM ER OFF CLOCK
ON
OFF
ON
Operation without the Remote Controller
If you have lost the remote control unit or if it is malfunctioning, follow the steps below.
1.How to turn on the air conditioner:
Open the front panel(if necessary), press the ON/OFF button with a ball-point.Then the air conditioner
will automatically select the operation mode according to the room temperature.
2.How to turn off the air conditioner:
Open the front panel(if necessary), press ON/OFF button with a ball-point.
Note: Do not press the ON/OFF button too long, as it may cause the air conditioner to operate
abnormally.
Tips for energy saving
Operation without the Remote ControllerOperation without the remote control
If the air inlet and air outlet is blocked it might affect the normal heat exchange of the air conditioner and even cause damage to the
appliance. When the air conditioner is operating in Cooling Mode during the daytime, please use a sun shield or curtains to keep
from direct sunlight from entering into the room.IF the walls and ceiling are irradiated by sunlight, it will take a long time to achieve
the set temperature during cooling opertaion. Clean the air-filters at a certain time(about every two weeks) and keep the air-filters
clean to to ensure normal heat exchange of the indoor unit.
Keep the door and windows well closed when the air-conditioner is running to avoid loss of heat.
Note: Press SUPER ,SMART, MODE,SLEEP or FAN button cancel SLEEP mode.
SUPER mode can be set when the appliance is in operation or energized.
In SUPER mode, you can set airflow direction or timer.
If you want to escape from SUPER mode, press SUPER, MODE, FAN,
ON/OFF or SLEEP button, the display will return to the original mode.
temperature,
SUPER mode is used to start or stop fast cooling or heating. In SUPER
mode, the super indicator will .
Fast cooling operates at high fan speed, changing the set temperature
automatically to 16°C;Fast heating operates at auto fan speed, changing the set
temperature automatically to 30 °C.
display on LCD
To Next Page
Loading...
Need help?
General
