If the door can be opened in the process, remaining time and door lock indicators in
display will flashes. Until child lock indicator turns off, you can open the door to load
clothes.
If the door lock indicator doesn’t flash, it indicates that current temperature is over
50°C or you have passed the time for reloading in the process, namely no clothes
allowed to load into the machine.
Switch on and select program required and corresponding function keys, then press the
“Pause/Start” button to run the program.
Delay End function allows to run the machine at the consumers convenience, for
example, at night when electricity is cheaper.
Select programme, temperature and options.
Press “ Spin Speed +Temp. ” button to select the delay time by 0.5 to 24 hours;
delay time shall be longer than wash time;
The time delay indication disappears when the programme starts and it is replaced by
the remaining programme time.
If the programme starts, the digital window will display the remaining time and “Delay
End” alternatively; when the time counts down to the total wash time, it will only display
the remaining time and the washing starts.
To cancel
Delay End, turn programme selector to another programme position,
before pressing “Start/Pause” button.
Press “On/Off ” button for 2 seconds to turn off the machine;
Restart the machine and select new programme and options. If needed, select spin speed.
Re-press “Start/Pause” button to start new programme. Don’t add detergent any more.
21
8.5 Reload in process
Press “Start/Pause” button to reload clothes in the process of washing.
8.3 Delay End
8.4 Progeamme Start
8.6 Change programme or optional function during operation