To strengthen the safety of children, the machine is equipped with “Child Lock” function.
When the programme starts, press “Temp. + Option” button simultaneously, LED will
display “SAFE ON” after buzzing, and then Child Lock is set up;
When the single lock is set, all function buttons will be shielded;
When the programme starts, press “Temp.+ Option” button simultaneously, LED will
display “SAFE OFF” after buzzing, and then Child Lock is released;
When power is shut down, child lock is released.
The washing machine is equipped with a power manager system.The duration of the left-on
mode is 30 second.
Press “On/Off ” button for 2 seconds to turn off the machine;
Close the tap;
Open the door and take the washed clothes out;
Slightly open the door to remove moisture in the pump.
22
Never open the door forcibly while the machine is running,otherwise you can damage
the door lock.
After the procedure ends, nixie tube displays the “E
nd”, and the door lock icon goes
out. At this time, the door can be opened.
If the door needs to be opened, press “Start/Pause” button, and if the door lock icon
flickers, it shows that the unlocking condition is met; in 2 minutes, the door lock icon
goes out, and at this time, the door can be opened; if the door lock icon does not flicker,
it shows that the unlocking condition is not met; under such situation, if the door needs
to be opened, keep pressing “ On/Off ” button for 2 seconds, to restart the washing
machine; select “Spin” procedure, and set the spin speed as “0” . After the procedure
operation ends, door locking icon goes out, and at this time, the door can be opened.
To open the door, hold the door handle, press the inside handle and pull the door. Close
the door by pressing it without excessive force until it clicks shut.
8.7 Programme end
8.8 Opening/closing door
8.9 Child lock
Child lock
To Next Page
Loading...
Need help?
General