40
AUTO CHANNEL SET
This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to
skip unused channels when using the CHANNEL UP (
) or DOWN ( ).
If the EXIT button is pressed while the AUTO CHANNEL SET function is engaged, programming will
stop. If two antenna are connected, switch antenna inputs with the INPUT button and repeat AUTO
CHANNEL SET for the second antenna input.
Remember to select the correct SIGNAL SOURCE mode before using AUTO CHANNEL SET.
See CHANNEL MEMORY to add or to erase additional channels.
CHANNEL MEMORY
Use this function after AUTO CHANNEL SET to add or erase additional channels to the remote control
CHANNEL
or buttons.
Add or erase additional channels while still in CHANNEL MEMORY using CHANNEL
or or the
number buttons to change the channel.
Press EXIT to quit menu or THUMB STICK
to return to previous menu.
To Next Page
Need help?
General
