7
When cutting the workpiece which has the dimension of “*” there might be some possibility
of the lower end of the circular saw to touch with the workpiece, even if the motor head is
located at the lower limit position. Pay attention when cutting the workpiece. For further
details, refer to “PRACTICAL APPLICATIONS” on page 18. Mount the auxiliary board on
the fence surface (Refer ( ) the thickness of auxiliary board). Refer to "5. Cutting large
workpieces" on page 20 (Fig. 28).
STANDARD ACCESSORIES
Fig. 3
OPTIONAL ACCESSORIES...sold separately
1 Extension Holder and Stopper
2 Saw blade 255mm (10") TCT Saw blade (Total teeth:72)
3 Sub Fence (A)
4 Crown molding Vise Ass’y (Include Crown molding Stopper (L))
5 Crown molding Stopper (L)
6 Crown molding Stopper (R)
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.
APPLICATIONS
Wood and aluminum sash.
2 Dust bag (1 piece)1 262mm (10") TCT
Saw blade (1 piece)
4 10mm BOX wrench
(1 piece)
3 Vise Assembly w/knob
bolt (1 piece)
For how to use, refer to
page 18.
5 Collar
Outside Dia. 25.4mm (1")
(1 piece)
Outside Dia. 30mm (1-3/16")
(1 piece) (Only model 240V)
For how to use, refer to
page 29.
01Eng_C10FSH_Eng 3/29/07, 12:30 PM7
To Next Page
Loading...
Need help?
General
