Hitachi CP-D10 Operating Guide

10
Adjusting the projector's elevator
When the place to put the projector is slightly uneven
to the left or right, use the elevator feet to place the
projector horizontally.
Using the feet can also tilt the projector in order to project at a suitable angle to
the screen, elevating the front side of the projector within 3 degrees.
This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is
adjustable while pushing the elevator button on the same side as it.
1.
Holding the projector, push the elevator buttons to loose the elevator feet.
2.
Position the front side of the projector to the desired height.
3.
Release the elevator buttons in order to lock the elevator feet.
4.
After making sure that the elevator feet are locked, put the projector down
gently.
5.
If necessary, the elevator feet can be manually twisted to make more precise
adjustments. Hold the projector when twisting the feet.
To loose an elevator foot, push the
elevator button on the same side as it.
CAUTION Ź'RQRWKDQGOHWKHHOHYDWRUEXWWRQVZLWKRXWKROGLQJWKH
projector, since the projector may drop down.
Ź'RQRWWLOWWKHSURMHFWRURWKHUWKDQHOHYDWLQJLWVIURQWZLWKLQGHJUHHVXVLQJ
the adjuster feet. A tilt of the projector exceeding the restriction could cause
malfunction or shortening the lifetime of consumables, or the projector itself.
7R¿QHO\DGMXVWWZLVWWKHIRRW
51
3°

Hitachi CP-D10 Specifications

General

Brand	Hitachi
Model	CP-D10
Category	Projector
Language	English