27
“H” Group: Motor Constants Functions
“P” Group: Expansion Card Functions
Note: The “P” Group parameters do not appear in the
parameter list shown on the keypad display unless the expansion
card is installed on the inverter.
Func.
Code
Name / Description
Default
Val ue
–FE(F)/–FU
Set
Val ue
H003/
H203
Motor capacity Factory set
H004/
H204
Motor poles setting
• 2 poles • 4 poles
• 6 poles • 8 poles
4
H006/
H206
Motor stabilization constant 100
Func.
Code
Name / Description
Default
Val ue
–FE(F)/–FU
Set
Val ue
P044 Network comm watchdog timer 1.00
P045 Inverter action on network comm error
• Trip (Error E70) • Decel, stop, and trip
• Hold last speed • Free run stop
• Decelerate and stop
01
P046 Polled I/O output instance number
•20 •21
• 100
21
P047 Polled I/O input instance number
•70 •71
• 101
71
P048 Inverter action on network idle mode
• Trip (Error E70) • Decel, stop, and trip
• Hold last speed • Free run stop
• Decelerate and stop
01
P049 Network motor poles setting for RMP 0
To Next Page
Loading...
Need help?
General