Hitachi LE50A6R9 User Manual

HitachiServiceManual‐LE50A6R9

©Copyright2015AllrightsreservedHitachiAmerica,Ltd.–Digital MediaDivision9
2420FentonSt.,Suite200ChulaVistaCA91914
Service Mode (Great Care Should Be Taken When in the Service Mode)
1. Press the Input key on the remote;
2. Enter “3138”;
3. You should now be in Service Mode;
If not, start sequence again making sure the remote is pointed towards the IR receiver.
Software Updates
1. Copy the software files to a USB stick in the ROOT directory;
It is recommended that only the update file(s) for this model be in the root directory.
2. Insert the USB stick with the AC power disconnected;
3. Connect the AC power and turn on the TV;
4. Put the set in Service Mode; (see Service Mode above)
5. Select Software Update (USB) and then select Yes;
6. When complete……..
7. Turn off the AC power & remove the USB stick;
8. Turn on the AC power and turn on the TV;
** Note: Do not turn off the TV while it is updating. **

Hitachi LE50A6R9 Specifications

General

Brand	Hitachi
Model	LE50A6R9
Category	LCD TV
Language	English