– 2 –
NAMES AND FUNCTIONS OF REMOTE CONTROLLER
L.H
■ This controls the operation function and timer setting of the room air conditioner. The range of control
is about 7 meters. lf indoor lighting is controlled electronically, the range of control may be shorter.
Precautions for Use
• Do not put the remote controller under direct sunlight and high temperature.
• Do not drop it on the fl oor, and protect it from water.
• If you press the FUNCTION button during operation, the air co ditioner may stop for about 3 minutes
for protection before you can start it again.
Signal Transmission
MODE Button
Select the operation mode.
( Page 3)
STOP Button
Press this button to stop operation.
ECO Button
Use this button to set the ECO mode.
( Page 6)
OFF TIMER Button
Select the turn OFF time.
( Page 4)
ON TIMER Button
Select the turn ON time.
( Page 4)
Transmission Sign
The transmission sign blinks
when a signal has been send.
POWERFUL Button
Press this button to start
powerful operation. ( Page 4)
TEMPERATURE Button
Room temperature setting.
Value will change quicker when
keep pressing.
( Page 3)
FAN SPEED Button
Select the fan speed for cooling
and heating mode.
( Page 3)
AUTO SWING Button
Control the angle of the
horizontal air defl ector.
( Page 7)
To Next Page
Need help?
General
