– 6 –
ECO OPERATION
■ Energy saving operation by changing set temperature and by limiting the maximum power
consumption value.
L.H
By pressing the (ECO) button during Auto, Heating,
Dehumidifying or Cooling operation, the air conditioner
performs the “ECO” operation.
Press (ECO) button during operation.
• "
" is displayed on the LCD.
• Energy saving operation will start by changing
the set temperature higher or lower and saving
operation power consumption.
START
Press (START/STOP) button.
• Press
(ECO) button again.
• "
" disappears from the LCD.
CANCEL
NOTE
• In case the power consumption is already low,ECO operation will not reduce the power
consumption.
•
By pressing (POWERFUL) button, ECO operation is cancelled.
• After auto restart, ECO operation is cancelled and previous operation mode shall start.
To Next Page
Loading...
Need help?
General
