Hitachi SV12SG User Manual

English
13
HOW TO INSTALL THE OPTIONAL ACCESSORIES
WARNING: Be sure to switch power OFF and disconnect the plug to avoid
accidents.
1. Installing the sponge pad (velcro type), the felt pad and the round rubber pad.
Fig. 7
CAUTION: Replace only the pad and use the other parts just as they are. The sander
will vibrate greatly if parts other than the pad are removed or exchanged.
Round
rubber pad
䡬 Loosen the four M4 × 10
screws and remove the quick
stick pad.
4-3/8” × 4”
(110 × 100 mm)
Quick stick pad
4-3/8” × 4”
(110 × 100 mm)
Sponge pad
(Velcro type),
felt pad
5” (125 mm)
round rubber
pad
䡬 Tighten the four M4 × 10
screws and attach the
sponge pad, felt pad
or round rubber pad.
Sponge pad or felt pad

Hitachi SV12SG Specifications

General

Power	200 W
Length (max)	137 mm
Dust container type	Dust bag
Soft grip	Yes
Product color	Black, Green
Type of sander	Orbital sander
Eccentricity	0.75 mm
Idle speed (max)	14000 RPM
Sound power level	79 dB
Oscillating orbit diameter	1.5 mm
Idle oscillation rate (max)	28000 OPM
Power source	AC

Weight and Dimensions

Weight	1100 g
Sanding plate size (WxD)	110 x 100 mm