Hitachi SV12SG User Manual

English
3
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in
the Instruction Manual before operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the
failure to observe basic safety rules or precautions. An accident can often be avoided by
recognizing a potentially hazardous situation before it occurs, and by observing appropriate
safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual
and in the sections which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identified by
WARNINGS on the power tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifically recommended by
HITACHI.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in
death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in
minor or moderate injury, or may cause machine damage.
NOTE emphasizes essential information.

Hitachi SV12SG Specifications

General

Power	200 W
Length (max)	137 mm
Dust container type	Dust bag
Soft grip	Yes
Product color	Black, Green
Type of sander	Orbital sander
Eccentricity	0.75 mm
Idle speed (max)	14000 RPM
Sound power level	79 dB
Oscillating orbit diameter	1.5 mm
Idle oscillation rate (max)	28000 OPM
Power source	AC

Weight and Dimensions

Weight	1100 g
Sanding plate size (WxD)	110 x 100 mm