SAFETY
SA-10
DRIVE MACHINE SAFELY
• Before driving the machine, always confirm that the
travel levers/pedals direction corresponds to the
direction you wish to drive.
• Be sure to detour around any obstructions.
• Avoid traveling over obstructions. Soil, fragments
of rocks, and/or metal pieces may scatter around
the machine. Don’t allow personnel to stay
around the machine while traveling.
• Driving on a slope may cause the machine to slip or
overturn, possibly resulting in serious injury or
death.
• When driving up or down a slope, keep the
bucket facing the direction of travel, approxi-
mately 200 to 300 mm (A) above the ground.
• If the machine starts to skid or becomes unstable,
immediately lower the bucket to the ground and
stop traveling.
• Driving across the face of a slope or steering on
a slope may cause the machine to skid or turn-
over. If the direction must be changed, move the
machine to level ground, then, change the direc-
tion to ensure sage operation.
019-E01D-0492
SA-387
SA-388
SA-441
SA-590
WRONG
To Next Page
Loading...
Need help?
General
