SAFETY
SA-21
PREVENT PARTS FROM FLYING
• Grease in the track adjuster is under high pressure.
Failure to follow the precautions below may result in
serious injury, blindness, or death.
• Do not attempt to remove GREASE FITTING or
VALVE ASSEMBLY.
• As pieces may fly off, be sure to keep body and
face away from valve.
• Travel reduction gears are under pressure.
• As pieces may fly off, be sure to keep body and
face away from AIR RELEASE PLUG to avoid
injury. GEAR OIL is hot.
• Wait for GEAR OIL to cool, then gradually loosen
AIR RELEASE PLUG to release pressure.
503-E01B-0344
SA-344
STORE ATTACHMENTS SAFELY
• Stored attachments such as buckets, hydraulic
hammers, and blades can fall and cause serious
injury or death.
• Securely store attachments and implements to
prevent falling. Keep children and bystanders
away from storage areas.
504-E01A-0034
SA-034
USE TOOLS PROPERLY
• Use tools appropriate for the work to be done.
• Makeshift tools, parts, and procedures can create
safety hazards.
• For loosening and tightening hardware, use the
correct size tools to avoid injury caused by
slipping wrenches.
• Use only recommended replacement parts.
(See the parts catalog.)
S522-E01A-0040
SA-040
To Next Page
Loading...
Need help?
General
