Take the jack out of the spare tire
area.
Turn the jack’s end bracket
counterclockwise to loosen it, then
remove the jack by lifting it
straight up.
Unscrew the wing bolt and take
the spare tire out of its well.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
Placethejackunderthejacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
restinginthejacknotch.
6.
5. 7. 8.
Changing a Flat Tire
384
JACK
WHEEL NUT WRENCH
JACKING POINT
09/07/16 18:52:13 31SWA630_389
To Next Page
Loading...
Need help?
General
