Honda 2010 CR-V User Manual

Push the button between the center
vents to turn on the hazard warning
lights (four-way flashers). This
causes all four outside turn signals
and both indicators in the instrument
panel to flash. Use the hazard
warning lights if you need to park in
a dangerous area near heavy traffic,
or if your vehicle is disabled.
To reduce glare at night, the
instrument panel illumination dims
when you turn the light switch to
or . Turning the select/
reset knob fully to the right until you
hear a beep will cancel the reduced
brightness.
You can change the instrument panel
brightness only when the light
switch is on.
Turntheknobonthelowerpartof
the instrument panel to adjust the
brightness.
You will hear a beep when maximum
or minimum brightness is reached.
Hazard Warning ButtonInstrument Panel Brightness
Instrument Panel Brightness, Hazard Warning Button
Instruments and Controls
79
HAZARD WARNING BUTTON
INSTRUMENT PANEL BRIGHTNESS
CONTROL KNOB
09/07/16 17:58:08 31SWA630_084

Honda 2010 CR-V Specifications

General

Brand	Honda
Model	2010 CR-V
Category	Automobile
Language	English