Honda 2010 CR-V User Manual

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats have
a rigid-type connector as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Remove the dual deck cargo shelf
(see page ).
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Route the tether strap over the
seat-back and through the legs of
the head restraint, then attach the
tether strap hook to the anchor,
making sure the tether strap is not
twisted.
5.
4.
3. 6.
117
CONTINUED
If equipped
Installing a Child Seat
Driver and Passenger Safety
45
Flexible typeRigid type
TETHER
ANCHOR
TETHER STRAP HOOK
09/07/29 20:30:17 31SWA630_050

Honda 2010 CR-V Specifications

General

Brand	Honda
Model	2010 CR-V
Category	Automobile
Language	English