201
uuOperating the Switches Around the Steering WheeluBrightness Control
Brightness Control
When the power mode is in ON, you can use
the brightness control dial to adjust
instrument panel brightness.
Brighten: Turn the dial up.
Dim: Turn the dial down.
You will hear a beep when the brightness
reaches minimum or maximum. Several
seconds after adjusting the brightness, you
will be returned to the previous screen.
■
Brightness level indicator
The brightness level is shown on the driver
information interface while you are adjusting
it.
1Brightness Control
The brightness of the instrument panel will be
reduced when the following conditions:
• The power mode is in ON.
• The parking lights are turned on and it is dark
outside.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
22 CIVIC 5D PET HMIN-31T406000.book 201 ページ ２０２１年７月２８日 水曜日 午前１１時４１分
To Next Page
Loading...
Need help?
General
