EasyManuals Logo
Home>Honda>Automobile>CR-V 2000

Honda CR-V 2000 User Manual

Honda CR-V 2000
322 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Controls Near the Steering Wheel
Headlights
The rotating switch on the left lever
controls the lights. Turning this
switch to the position turns
on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the switch to the
position turns on the headlights.
If you leave the lights on with the
ignition switch in ACCESSORY (I)
or LOCK (0), you will hear a
reminder beeper when you open the
driver's door.
To change between low beams and
high beams, pull the turn signal lever
until you hear a click, then let go.
The blue high beam indicator will
light (see page 55).
To flash the high beams, pull the
turn signal lever back lightly, then
release it. The high beams will come
on and go off.
The high beams will stay on for as
long as you hold the lever back, no
matter what position the headlight
switch is in.
Daytime Running Lights
(Canadian Models)
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
off, even if you set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
Instruments and Controls

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda CR-V 2000 and is the answer not in the manual?

Honda CR-V 2000 Specifications

General IconGeneral
BrandHonda
ModelCR-V 2000
CategoryAutomobile
LanguageEnglish

Related product manuals