uuWhen DrivinguHill Descent Control System
450
■
To turn the system on
When the vehicle speed is less than about 12
mph (20 km/h), press the button to turn
the system on.
u The system goes into standby mode, and
the Hill Descent Control System indicator
(white) comes on.
When all the working conditions are met, the
system activates, and the vehicle begins to
maintain the vehicle speed when driving
downhill.
u The Hill Descent Control System indicator
(green) comes on when operating.
■
To adjust the set speed
Depress the accelerator pedal or brake pedal
to adjust the vehicle speed within the
operating range. The vehicle speed at which
you release the accelerator pedal or brake
pedal will be the set speed.
■
To turn the system off
Press the button to turn the system off.
■
How to Operate Hill Descent Control
1How to Operate Hill Descent Control
Using the system repeatedly for a long time may
cause the brakes to heat up and make the system go
into standby mode temporarily.
Hill Descent Control is turned off every time you turn
the engine off, even if it was turned on the last time
you drove the vehicle.
The pedals may vibrate or you may hear the system
working when in operation.
Hill Descent Control System
Indicator
(Hill Descent Control) Button
1To turn the system off
When the vehicle speed is about 37 mph (60 km/h) or
more, the system turns off automatically.
To Next Page
Loading...
Need help?
General
