Name: Honda CRF250F 2020
Brand: Honda
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Servicing Your Honda 63

Engine Oil

Replace the O-ring and apply a thin coat of

engine oil to the new O-ring before installing it.

9. Install the oil filter cover/O-ring and oil filter

cover bolts. Tighten the bolts to the specified

torque:

9 lbf·ft (12 N·m, 1.2 kgf·m)

10.

Install a new sealing washer onto the drain bolt.

11.

Tighten the oil drain bolt to the specified torque:

18 lbf·ft (24 N·m, 2.4 kgf·m)

12.

Pour the recommended oil into the

crankcase;

If the oil filter was replaced:

1.5 US qt (1.4 )

If the oil filter was not replaced, use

approximately:

1.5 US qt (1.4 )

13.

Install the oil fill cap/dipstick securely.

14.

Start the engine and let it idle for 3-5

minutes. Stop the engine. Wait 2-3 minutes.

15.

With the motorcycle held upright on level

ground, check the oil level.

If needed, add oil (page 60) until it reaches

the upper level mark. (Do not overfill.)

16.

Check for oil leaks.

Questions and Answers:

Need help?

Do you have a question about the Honda CRF250F 2020 and is the answer not in the manual?

Honda CRF250F 2020 Specifications

General