Removing & Installing Body Components
Battery
#
Removal
Make sure the ignition switch is in the OFF
position.
1.
Remove the left side cover. 2 P. 57
2.
Remove the bolts.
3.
Remove the battery holder.
4.
Disconnect the negative - terminal from
the battery.
5.
Disconnect the positive + terminal from
the battery.
6.
Remove the battery taking care not to
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected. 2 P. 22
For proper handling of the battery, see
“Maintenance Fundamentals.” 2 P. 46
“Battery Goes Dead.” 2 P. 98
Maintenance
55
Negative terminal
Positive terminal
Bolts
Battery
Battery holder
To Next Page
Loading...
Need help?
General
