EasyManuals Logo

Honda CRF250R 2020 User Manual

Honda CRF250R 2020
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
108 Servicing Your Honda
Brakes
Brake pad wear depends on the severity of usage
and track conditions. (Generally, the pads will
wear faster with wet and dirty track conditions.)
Inspect the brake pads at each regular maintenance
interval (page 25).
Front Brake Pads
Inspect the brake pads (1) through the front wheel
to determine the brake pad wear. If either brake
pad is worn anywhere to a thickness of 0.04 in (1.0
mm), both brake pads must be replaced.
Rear Brake Pads
Inspect the brake pads (1) from the rear side of the
caliper to determine the brake pad wear. If either
brake pad is worn anywhere to a thickness of 0.04
in (1.0 mm), both brake pads must be replaced.
Check that the front brake lever and rear brake
pedal assemblies are positioned properly
(page 105) and the securing bolts are tight.
Make sure there are no fluid leaks. Check for
deterioration or cracks in the hoses and fittings.
Brake Pad Wear
(1) brake pads (3) brake disc
(2) front brake caliper
minimum
thickness indicator
0.04 in
(1.0 mm)
0.04 in (1.0 mm)
replace
wear indicator
grooves
(1)
(1)
(2)
(3)
(1) brake pads (3) brake disc
(2) rear brake caliper
minimum thickness
indicator
0.04 in
(1.0 mm)
replace
(2)
(3)
(1)
Other Inspections

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda CRF250R 2020 and is the answer not in the manual?

Honda CRF250R 2020 Specifications

General IconGeneral
Engine Type249cc liquid-cooled single-cylinder four-stroke
Bore x Stroke79.0mm x 50.9mm
Compression Ratio13.9:1
IgnitionFull transistorized ignition
Front BrakeSingle 260mm disc with twin-piston caliper
Front Tire80/100-21
Rear Tire100/90-19
Trail4.6 inches
Wheelbase58.3 inches
Seat Height37.8 inches
Fuel Capacity1.6 gallons
Ground Clearance13.2 inches
Valve TrainUnicam, 4-valve
InductionProgrammed Fuel Injection (PGM-FI)
Transmission5-speed
Final Drive#520 chain
Front Suspension49mm inverted Showa coil-spring fork with rebound and compression damping adjustability; 12.2 inches travel
Rear SuspensionShowa® Pro-Link® system with rebound and compression damping adjustability; 12.4 inches travel
Rear BrakeSingle 240mm disc
Rake27.2°

Related product manuals