EasyManuals Logo

Honda CRF250R 2020 User Manual

Honda CRF250R 2020
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background image
Suspension Adjustments for Track Conditions
134 Adjustments for Competition
Suspension Adjustments for Track Conditions
Soft Surface
On soft ground, sand, and especially mud, consider
increasing compression damping front and rear.
Sand often requires a bit more rebound damping to
minimize rear end kick. Although sand bumps are
usually larger, there’s more distance between
them, giving the shock more time to recover.
You may want a little bit stiffer front suspension
for sand tracks to help keep the front end up and
improve straight-line stability.
In a muddy event, stiffer optional springs front and
rear may help, especially if you are heavier than
the average rider. Your CRF may be under-sprung
because of the added weight of the clinging mud.
This additional weight may compress the
suspension too much and affect traction.
Hard Surface
For a fast, hard track with no large jumps, you can
probably run the same setting as normal, but run
softer damping both ways-compression and
rebound. If you run softer rebound damping, the
wheel will follow the rough ground and small
bumps much better, and you will hook up better.
With a lot of rebound damping, the wheel returns
very slowly and doesn’t contact the ground quickly
enough after each bump. The result is a loss of
traction and slower lap times.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda CRF250R 2020 and is the answer not in the manual?

Honda CRF250R 2020 Specifications

General IconGeneral
Engine Type249cc liquid-cooled single-cylinder four-stroke
Bore x Stroke79.0mm x 50.9mm
Compression Ratio13.9:1
IgnitionFull transistorized ignition
Front BrakeSingle 260mm disc with twin-piston caliper
Front Tire80/100-21
Rear Tire100/90-19
Trail4.6 inches
Wheelbase58.3 inches
Seat Height37.8 inches
Fuel Capacity1.6 gallons
Ground Clearance13.2 inches
Valve TrainUnicam, 4-valve
InductionProgrammed Fuel Injection (PGM-FI)
Transmission5-speed
Final Drive#520 chain
Front Suspension49mm inverted Showa coil-spring fork with rebound and compression damping adjustability; 12.2 inches travel
Rear SuspensionShowa® Pro-Link® system with rebound and compression damping adjustability; 12.4 inches travel
Rear BrakeSingle 240mm disc
Rake27.2°

Related product manuals