99
Troubleshooting
When the Idling Stop System Does Not Operate Properly
Idling Stop Indicator Does
Not Come On
If you did not ride the vehicle after engine starts:
Ride the vehicle at speeds of over 10 km/h
(6 mph). The Idling Stop system does not
operate until you ride once.
If PGM-FI malfunction indicator lamp (MIL) lights:
When the PGM-FI malfunction indicator
lamp (MIL) lights, the Idling Stop system does
not operate for protection of the engine. See
your dealer.
If the battery voltage is low:
Ride the vehicle awhile, then stop the engine
and then restart the engine with start button,
referring to the starting procedure (
2
P. 37
)
for standard engine starting. The Idling Stop
system may not operate if the battery
voltage is low.
If this occurs frequently, contact your dealer.
SCV125 II ID
When the Idling Stop indicator does not
come on, perform the followings.
If the Idling Stop switch is at IDLING:
Press the Idling Stop switch to IDLING STOP.
If you started the engine with the kickstarter:
If you started the engine with the kickstarter,
the Idling Stop system may not operate.
Restart the engine with the start button,
referring to the starting procedure (
2
P. 37
)
for standard engine starting.
If the engine is cold:
Warm up the engine.
The Idling Stop system does not operate
when the engine is cold.
To Next Page
Loading...
Need help?
General