65
Maintenance
Removing & Installing Body Components
Battery
Removal
Make sure the ignition switch is in the OFF
position.
1. Remove the battery lid.
2
P. 6 6
2. Remove the battery holder by removing
bolt.
3. Disconnect the negative terminal from
the battery.
4. Disconnect the positive terminal from
the battery.
5. Remove the battery taking care not to
drop the terminal nuts.
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
Make sure clock information is correct after
the battery is reconnected.
2
P. 19
For proper handling of the battery, see
“Maintenance Fundamentals.”
2
P. 5 6
“Battery Goes Dead.”
2
P. 103
Battery holder
Battery
Positive
terminal
Negative
terminal
Bolt
To Next Page
Loading...
Need help?
General