40
8. MAINTENANCE
The purpose of the maintenance and adjustment schedule is to keep
the generator in the best operating condition.
Inspect or service as scheduled in the table below.
Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
• Carbon monoxide poisoning from engine exhaust. Be sure there is
adequate ventilation whenever you operate the engine.
• Burns from hot parts. Let the engine and exhaust system cool before
touching.
• Injury from moving parts. Do not run the engine unless instructed to
do so.
The muffler becomes very hot during operation and remains hot for a
while after stopping the engine. Be careful not to touch the muffler
while it is hot. Let the engine cool before maintenance.
CAUTION:
Use Honda Genuine parts or their equivalent. The use of replacement
parts which are not of equivalent quality may damage the generator.
Maintenance Schedule
NOTE: (1) For commercial use, log hours of operation to determine proper maintenance
intervals
.
(2) Service more frequently when used in dusty areas.
(3) These items should be serviced by your servicing dealer, unless you have the
proper tools and are mechanically proficient. Refer to the Honda shop manual for
service procedures.
Each
use
First
month
or
20 hrs.
Every 3
months
or
50 hrs.
Every 6
months
or
100 hrs.
Every year
or
300 hrs.
Engine oil Check level o
Change o o
Air cleaner Check o
Clean o (2)
Sediment cup Clean o
Spark plug Check-adjust o
Replace o
Spark arrester Clean o
Valve Clearance Check-adjust o (3)
Combustion
chamber
Clean After every 1,000 Hrs. (3)
Fuel tank & filter Clean o (3)
Fuel tube Check Every 2 years (Replace if necessary) (3)
REGULAR SERVICE PERIOD (1)
Perform at every indicated month
or operating hour interval,
whichever comes first.
Item
36Z256230.book 40 ページ ２０１３年６月２５日 火曜日 午後１２時２９分
To Next Page
Loading...
Need help?
General
