EasyManuals Logo

Honda EU65is User Manual

Honda EU65is
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
56
c. After all the fuel has drained, tighten the drain screw securely and
turn the fuel valve to the OFF position.
d. Remove the sediment cup, and empty it and reinstall.
3.Change the engine oil (see page 41).
4.Remove the spark plug and pour about a tablespoon of clean engine
oil into the cylinder. Crank the engine several revolutions to distribute
the oil, then reinstall the spark plug.
5.Slowly pull the starter grip until resistance is felt. At this point, the
piston is coming up on its compression stroke and both the intake
and exhaust valves are closed. Storing the engine in this position will
help to protect it from internal corrosion.
6.Remove the battery maintenance cover and disconnect the battery
negative (–) terminal (see pages 50 and 51). Cover the battery cable
negative terminal with vinyl tape.
Once a month, recharge the battery.
7.Store the generator in clean area.
36Z256230.book 56 ージ 013年6月25日 火曜日 午後12時29

Other manuals for Honda EU65is

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda EU65is and is the answer not in the manual?

Honda EU65is Specifications

General IconGeneral
ModelEU65is
TypeInverter
Maximum AC Output6500W
Rated AC Output5500W
Noise Level at 1/4 Load52 dB(A)
Noise Level at Rated Load60 dB(A)
Starter SystemElectric
Engine Displacement389 cc
i-MonitorYes
AVRYes
DC Output12V, 8.3A
EngineHonda GX390
Run Time at Rated Load5.1 hours
AC Output120/240V
Fuel TypeGasoline

Related product manuals