133
uuAudio System Basic OperationuPlaying a USB Flash Drive
*
Continued
Features
Playing a USB Flash Drive
*
Your audio system reads and plays sound files on a USB flash drive in either MP3,
WMA or AAC
*1
format.
Connect your USB flash drive to the USB adapter cable, then press the AUX button.
2 USB Adapter Cable
*
P. 123
*1:Only AAC format files recorded with iTunes® are playable on this unit.
/ Buttons
Press to skip to the next
folder, and to skip to the
beginning of the previous
folder.
(Power) Button
Press to turn the audio
system on and off.
/ (Seek) Buttons
Press to change files.
RDM (Random) Button
●
Press to play all files in random order.
●
Press two times to play all files in the
current folder in random order.
●
To turn off random, press and hold the
button.
Selector Knob
Turn to adjust the volume.
Press and turn to select an item,
then press to set your selection.
AUX Button
Press to select USB flash drive
(if connected).
USB Indicator
Comes on when a USB
flash drive is connected.
SCAN Button
You will get a 10-second sampling of each file.
●
Press to sample all files in the current folder.
●
Press two times to sample the first file in each
of the main folders.
●
To turn off scan, press and hold the button.
RPT (Repeat) Button
●
Press to replay a file continuously.
●
Press two times to replay all files in the
current folder.
●
To turn off repeat, press and hold the
button.
* Not available on all models
To Next Page
Loading...
Need help?
General
