PGM-FI (Programmed Fuel
Injection) Malfunction
Indicator Lamp (MIL)
Reasons for the indicator lamp to come
on or blink
● Comes on if there is a problem with the
engine emissions control system.
● Blinks when engine misfiring is detected.
What to do when the indicator lamp
comes on
Avoid high speeds and immediately get your
vehicle inspected at a dealer.
What to do when the indicator lamp
blinks
Park the vehicle in a safe place with no
flammable items and wait at least 10 minutes
with the engine stopped until it cools.
NOTICE
If you drive with the malfunction indicator lamp
comes on, the emissions control system and the
engine could be damaged.
NOTICE
If the malfunction indicator lamp blinks again
when restarting the engine, drive to the nearest
dealer at 50 km/h (31 mph) or less. Have your
vehicle inspected by your dealer.
20201009081441_32MKV6000_eng_BOOK Page 163 Friday, October 09 2020 08:19:30 JST
Warning Indicators On or Flashing u PGM-FI (Programmed Fuel Injection) Malfunction Indicator Lamp (MIL)
Troubleshooting
160
To Next Page
Loading...
Need help?
General
