Side Stand
Checking the Side Stand
1.
Check that the side stand operates
smoothly. If the side stand is stiff or
squeaky, clean the pivot area and
lubricate the pivot bolt with clean grease.
2.
Check the spring for damage or loss of
tension.
3.
Sit on the vehicle and raise the side stand.
4.
Start the engine and press the D on the
N-D switch to switch the transmission into
D mode.
5.
Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn't stop, have
your vehicle inspected by your dealer.
20201009081441_32MKV6000_eng_BOOK Page 151 Friday, October 09 2020 08:19:30 JST
Maintenance
148
Side stand spring
To Next Page
Loading...
Need help?
General
