9. MAINTENANCE
BLADE REMOVAL AND INSTALLATION
When the blade needs sharpening or replacement, take the lawn mower to
an authorized Honda lawn mower dealer. Or, if you have a torque wrench, you
can remove and install the blade yourself. Wear heavy gloves to protect your
hands.
l Blade sharpening: To reduce the possibility of weakening the blade, or causing
imbalance or poor cutting performance, have the blade sharpened by an
authorized Honda lawn mower dealer.
l Blade replacement: Use a genuine Honda replacement blade or its equivalent.
Blade Removal
1. Turn the fuel valve OFF, and rest the mower on its right side, so the carburetor
side is up.
NOTE: Hard starting and fuel leakage may result if the mower is placed with
the carburetor side down.
2. Remove the two blade bolts with a 14 mm socket wrench. Use a wooden
block to prevent the blade from turning when removing the bolts.
3. Remove the blade and blade holder.
BLADE BOLTS ’
To Next Page
Loading...
Need help?
General
