−
−
−
−
−
17.0 in (433 mm)
22.2 in (563 mm)
27.7 in (703 mm)
28
POWER REQUIREMENTS
INSTALLATION POSITION
BOAT TRANSOM
REQUIREMENTS
INSTALLATION
CENTER LINE
TTRRAANNSSOOMM HHEEIIGGHHTT
050mm
(0 2.0 in)
Correct and secure installation is
essential for safe boating and good
performance. Follow the installation
instructions provided in this manual.
Before installation, check to be sure
that the outboard motor does not
exceed the recommended maximum
horsepower for the boat on which it
is to be installed. Refer to the boat’s
certification plate for recommended
maximum horsepower. If the
certification plate information is not
available, contact the boat dealer or
manufacturer.
For most applications, the outboard
motor should have a horsepower
rating which provides 80% of the
maximum recommended horsepower
for the boat.
Install the outboard motor on the
center of the boat transom.
Honda BF15D/BFP15D/BF20D and
BFP20D outboard motors can be
installed on a boat transom having a
thickness range of 1.3 2.2 inches
(35 57 mm).
The antiventilation plate of the
outboard motor should be 0 2.0
inches below the bottom of the boat.
Type:
S:
L:
X:
Transom Height
03/03/24 18:08:11 31ZY0600_029
To Next Page
Loading...
Need help?
General
