Honda PCX 150 User Manual

The following moves the ordinary display at
display setting.
• The switch is not pressed for about 30
seconds
• Turn the ignition switch to the (Off)
position and then to the (On) position
1 Clock setting:
a
Turn the ignition switch to the (On)
position.
b
Press and hold
SEL
switch and
SET
switch,
the all clock digits start flashing.
c
Press
SET
switch, the hour digits start
flashing.
d
Press
SEL
switch until the desired hour is
displayed.
u Press and hold to advance the hour fast.
e
Press
SET
switch. The minute digits start
flashing.
f
Press
SEL
switch until the desired minute is
displayed.
u Press and hold to advance the minute
fast.
g
Press
SET
switch. The clock is set, and then
the display moves to the backlight
brightness adjustment. (backlight brightness
indicator and backlight brightness
adjustment segments start flashing.)
20180912083000_32K97Q000_eng_BOOK Page 26 Wednesday, September 12 2018 08:36:26 JST
Operation Guide
23
Continued

Honda PCX 150 Specifications

General

Displacement	149cc
Bore x Stroke	57.3mm x 57.9mm
Compression Ratio	10.6:1
Fuel System	PGM-FI electronic fuel injection
Ignition	Full transistorized ignition
Transmission	Automatic V-Matic
Front Suspension	31mm telescopic fork
Front Brake	Hydraulic disc
Rear Brake	Mechanical drum
Front Tire	100/80-14
Rear Tire	120/70-14
Wheelbase	51.8 inches
Seat Height	30.1 inches
Fuel Capacity	2.1 gallons
Starter	Electric
Front Brake Disc Size	220mm
Rear Brake Drum Size	130mm
Rear Suspension	Twin shock