Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat
tyre, can be a major inconvenience.
Check the following items before you get on
your scooter:
● Fuel level - Fill fuel tank when necessary.
2 P. 60
●
●
●
Throttle - Check for smooth opening and full
closing in all steering positions. 2 P. 102
Engine oil level - Add engine oil if necessary.
Check for leaks. 2 P. 88
Coolant level - Add coolant if required.
Check for leaks. 2 P. 92
20180912083000_32K97Q000_eng_BOOK Page 76 Wednesday, September 12 2018 08:36:26 JST
Maintenance
71
●
●
Brakes - Check operation;
Front: check brake fluid level and pads wear.
2 P. 94, 2 P. 96
Combi Brake: check brake fluid level. 2 P. 94
Rear: check shoes wear and freeplay, adjust
if necessary. 2 P. 97, 2 P. 100
Lights and horn - Check that lights,
indicators and horn function properly.
●
Side stand ignition cut-off system - Check for
proper function. 2 P. 101
●
Wheels and tyres - Check condition, air
pressure and adjust if necessary. 2 P. 77
To Next Page
Loading...
Need help?
General
