Followings are requirements for the Idling
Stop system to operate properly.
Before riding
Put the side stand up.
Warm up the engine. Idling Stop system
does not operate, if the engine is not
warmed up.
Push the Idling Stop switch to the
‘‘ ’’.
Ride the scooter at proper riding position.
Idling Stop system is designed not to
work when no load on the seat.
Ridethescooteratspeedabove10km/h(6
mph), to enable the Idling Stop system
under above conditions.
After Stopping
Close the throttle completely. Engine will
not stop if the throttle is little opened.
Stop the scooter completely. Engine will
notstopifthespeedisnotat0km/h(0
mph).
Idling Stop System Operating
Conditions
IDLING STOP
53
10/02/17 16:56:03 32KWN600_063
To Next Page
Loading...
Need help?
General
