Refer to the Safety Precautions on page .
The light bulb becomes very hot while the
light is ON, and remains hot for a while
afteritisturnedOFF.Besuretoletitcool
down before servicing.
Be sure to turn the ignition switch OFF
when replacing the bulb.
Do not use bulbs other than those
specified.
After installing a new bulb, check that the
light operates properly.
Do not put finger prints on the headlight
bulb, as they may create hot spots on the
bulb and cause it to break.
Wear clean gloves while replacing the bulb.
If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol
to prevent its early failure.
87
BULB REPLACEMENT
116
10/02/17 17:02:20 32KWN600_126
To Next Page
Loading...
Need help?
General
