Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat
tyre, can be a major inconvenience.
Check the following items before you get on
your vehicle:
● Fuel level - Fill fuel tank when necessary
2 P. 64
●
Throttle - Check for smooth opening and
full closing in all steering positions 2 P. 100
●
Engine oil level - Add engine oil if necessary.
Check for leaks 2 P. 93
●
Coolant level - Add coolant if required.
Check for leaks 2 P. 95
● Brakes - Check operation;
Front and Rear: check brake fluid level and
pads wear 2 P. 97, 2 P. 98
● Lights and horn - Check that lights,
indicators and horn function properly
● Side stand ignition cut-off system - Check
for proper function 2 P. 99
● Wheels and tyres - Check condition, air
pressure and adjust if necessary 2 P. 85
20221005152442_32K2SA000_eng_BOOK Page 82 Wednesday, October 05 2022 15:28:04 JST
Maintenance
79
To Next Page
Loading...
Need help?
General
