To activate the system, “Setting the Anti-theft
Alarm System.” 2 P. 45
For proper handling of the battery, see
“Maintenance Fundamentals.” 2 P. 80
“Battery Goes Dead.” 2 P. 122
Clip
#
Removal
1.
Press down on the centre pin to release
the lock.
2.
Pull the clip out of the hole.
#
Installation
1.
Push the bottom of the centre pin.
2.
Insert the clip into the hole.
3.
Press down on the centre pin to lock the
clip.
20221005152442_32K2SA000_eng_BOOK Page 94 Wednesday, October 05 2022 15:28:04 JST
Removing & Installing Body Components u Clip
Maintenance
91
Centre pin
To Next Page
Loading...
Need help?
General
