Honeywell 10282 User Manual

Set Screw
7
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
8. Remove the downrod clip and downrod pin from
the downrod (Fig. 8).
Downrod
Clip
Downrod
Pin
Fig. 8
Fig. 7
Fig. 9
Downrod
Canopy
Yoke
Cover
Downrod Pin
Downrod Clip
9. Insert the downrod through the canopy and yoke
cover. Feed the wires from the fan through the
downrod (Fig. 9).
7. Partially loosen the two set screws in the yoke at
the top of the motor housing (Fig. 7).

Honeywell 10282 Specifications

General

Brand	Honeywell
Model	10282
Category	Ceiling fans
Language	English