2
Opening Safe For The First Time
11
Home and Office Security Safes
Opening Your Safe for the First Time Using
the Pre-set Factory Code
Batteries have been pre-installed at the factory. Using the
factory pre-set Passcode 159#, open the safe as follows:
1. Enter the three digit Factory Passcode 159 on the keypad
followed by the # Symbol. If entered correctly, the green
LED will light and the lock will click.
2. Rotate the small handle on the knob clockwise to the
right, and then pull the door open.
3. A fast blinking amber light indicates that the Passcode was
entered incorrectly. Re-enter the correct Passcode and
try again.
Security Lockout:
The safe is designed to lock out the keypad function if the wrong Passcode is
entered multiple times.
• After the 3rd error: 20 second lock-out. (waiting period)
• 4-6 errors: 5 minute lock-out.
• 7+ errors: 1 hour lock-out.
If you have forgotten the Passcode, entry can be made using the Emergency
Override Key. (See page 4).
Important:
If no action is taken, the safe will automatically relock in 5 seconds and the
Passcode will need to be re-entered.
Closing Your Safe
1. Make sure nothing inside the safe is obstructing the door from completely
closing.
2. Rotate the knob counterclockwise to the left and the safe will lock.
Notes
Amber
Light
Green
Light
# Symbol
Rotate
right
to open
To Next Page
Loading...
Need help?
General