If you wish to prevent your personal code from
being read on the digital readout, it can be
hidden from view by inserting the “” after “#”.
Example: “# 1 2 3 4 #”.
If an incorrect code is entered, the word
“ERROR” will appear on the digital readout
and an alert tone will sound. At this time, re-
enter the correct code.
If an incorrect code is entered (3) times, the system will enter lockout mode
for 5 minutes.
The LCD will read “HOLD-05” showing the
minutes remaining. During the first minute the
security alarm will sound. During the entire 5-
minute period, the safe cannot be entered.
If incorrect codes continue to be entered once
the first five minute period has finished, a new
15-minute lockout period will begin and the
alarm will sound during the first minute.
This safe is equipped with a security alarm.
To activate alarm, press “0” with door closed.
Display will read “ALERT-ON”.
The alarm will sound whenever:
The wrong code is entered 3 or more times to gain entry
The safe is tilted more than 20° degrees
The safe is shaken or experiences forceful impact.
To de-activate alarm or turn off alarm siren, enter an active user code.
To Next Page
Loading...
Need help?
General