If you wish to prevent your personal code from
being read on the digital readout, it can be hidden
from view by inserting the “” after “#”.
Example: “# 1 2 3 4 #”.
If an incorrect code is entered, the word
“ERROR” will appear on the digital readout and
an alert tone will sound. At this time, re-enter the
correct code.
If an incorrect code is entered three (3) times, the siren will sound for one (1)
minute before the system enters into lockout mode for 5 minutes.
During the 1st minute, the siren sound can be
stopped if correct code is entered, if no action or
another three (3) incorrect codes are entered
during the 1st minute the system will enter into
lockout mode (5 minutes).If another 3
incorrect codes are entered after the first
lockout period, the siren will sound for 1 minute
before entering the 2nd phrase of 15-minute
lockout period.
During the lockout period, if battery is removed
the system will enter 15-minute lockout period.
This safe is equipped with a security alarm.
To activate alarm, press “0” with door closed.
Display will read “ALERT-ON”.
The alarm will sound whenever:
▪ The wrong code is entered 3 or more times to gain entry
▪ The safe is shaken or experiences forceful impact.
To Next Page
Loading...
Need help?
General