ComfortPoint
TM
Open System
11 EN1B-0498GE51 R0512
Accessories
XS830 Auxiliary Terminal Package
Features
• For mounting onto the top of already-installed CPO-
IO830A modules in order to equip them with additional
terminals.
• Each unit consists of two groups of terminal blocks
(the "A" block and the "B" block), each with nine internally-
connected push-in terminals with a maximum load of 12 A.
A1 A2
A3
A4
A5
A6
A7
A8 A9
B1 B2
B3
B4
B5
B6
B7
B8 B9
Fig. 12. XS830 Auxiliary Terminal Package
Terminal Assignment
1 12 2
3 3
4 4
5 5
6 6
A1 B1A2 B2
A3 B3
A4 B4
A5 B5
A6 B6
A7
A8 A9
B7
B8 B9
7 8 9
7 8 9
Fig. 13. Terminal assignment and internal connections of
XS830 Auxiliary Terminal Package
XS831 Auxiliary Terminal Package
Features
• For mounting onto the top of already-installed CPO-
IO830A modules in order to equip them with additional
terminals.
• Two groups of four pairs of push-in terminals (A1B1, A2B2,
… A8B8, each with a 499Ω resistor) for converting
0…20 mA signals (maximum load per resistor = 25 mA)
into 0…10 Vdc signals, and one push-in ground terminal
per group. See also Fig. 10 and Fig. 11.
NOTE: The ground side of each of the eight incoming
0…20 mA signals (A1B1, A2B2, … A8B8) must be
connected to a ground terminal.
A1 B1
A2 B2
A3 B3
A4
B4 G1 G2
A5
B5
A6 B6
A7 B7
A8 B8
Fig. 14. XS831 Auxiliary Terminal Package
Terminal Assignment
1 12
2
3 3
4
4
5
5
6 6
A1 B1 A2 B2
A3 B3
A4 B4
G1
A5
B5
A6
B6
A7
A8
B7
B8
G2
7
8 9
7 8 9
Fig. 15. Terminal assignment and internal connections of
XS831 Auxiliary Terminal Package
XS816 Bridge Connectors
• Bridge connectors transmit both communication signals
and power supply between Panel Bus I/O modules.
• Supplied with the terminal socket / CPO-IO830A.
To Next Page
Loading...
Need help?
General
