Honeywell DC515N User Manual

2
Change the Light Pattern
Press the Sunlight button to change the lights that ash
when the doorbell rings.
Press the Sunlight button
1 time 2 times 3 times 4 times
Halo light and
top lights
Halo light only Top lights only
No lights
Overview
Just follow these simple steps:
1. Install the push button battery. Depending on the model, plug in the
doorbell or install the batteries in it.
2. Set up the doorbell and your preferences.
3. Install the push button.
Doorbell for indoor use only. Do not expose to liquid, vapour or rain.
Power-up
1. Choose an outlet location that is not near a heat
source, where the doorbell will be easy to see and
hear and power it.
2. Open the push button battery cover and install the
CR2032 battery.
Setup and Operation
Press the push button to test whether it is paired with the doorbell. The
doorbell will light up and ring. If it does not, see “Connect a Push Button” on
page 7.
+

Honeywell DC515N Specifications

General

Brand	Honeywell
Model	DC515N
Category	Accessories
Language	English