Honeywell DC515N User Manual

4
Install Push Button
1. Mount the push button
bracket in the desired
location. Use the screws.
–OR–
Use the adhesive backing. If
using the adhesive backing,
clean the surface first.
2. Snap the push button onto
the mounting bracket.

Note: If you need to remove the push button, use a small
screwdriver to release the tab.
Set the Mute
You can also mute the doorbell for specic amounts of time.
Press the Mute button.
Mute button shows Doorbell is mute
1 time
doorbell is mute
2 times
3 hours
3 times
6 hours
Mute button shows Doorbell is mute
4 times
9 hours
5 times
12 hours
6 times
no longer mute
It is also easier to unmute the doorbell by pressing and holding the mute
button
until it beeps.

Honeywell DC515N Specifications

General

Brand	Honeywell
Model	DC515N
Category	Accessories
Language	English